China professional factory for Bone Ash Ceramics - High quality animal hide glue technical gelatin for adhesives – Gelken factory and suppliers

Send email to us info@gelken.cn

professional factory for Bone Ash Ceramics - High quality animal hide glue technical gelatin for adhesives – Gelken

Product Detail

Product Tags

Feedback (2)

With our leading technology at the same time as our spirit of innovation,mutual cooperation, benefits and development, we are going to build a prosperous future alongside one another with your esteemed enterprise for Collagene Gelatine, Agar Gelatin Powder, Leaf Gelatine, In addition, we would properly guide the customers about the application techniques to adopt our products and the way to select appropriate materials.

professional factory for Bone Ash Ceramics - High quality animal hide glue technical gelatin for adhesives – Gelken Detail:

Industrial Gelatin has a strong ability to emulsify and promote dispersion and suspension between different phases, which can also be understood as a protective ability of colloid.

Industrial gelatin has a strong adhesive force, and it can maintain the integrity of the product, which is related to the hydrophilicity of gelatin.

1. First with the volume of the same or slightly more water(general glue and water ratio of 1 to 1.2-3.0, it is best to use warm water) to soak the glue for a few hours or so, make the glue block soft, and then heated to about 75 degrees, make it become glue liquid can be used.
2. The ratio of glue and water should be determined according to the required viscosity. More water, lower viscosity, and less water, higher viscosity. When heated the gelatin, the temperature should not be too high, because the temperature over 100 degrees will decrease the viscosity due to molecular degradation, and the gelatin will age and deteriorate.
3. There are trace precipitates in the use of glue, so it is necessary to mix with water while using to adjust viscosity and fluidity. Bath heat must be used to heat the glue. It is absolutely not allowed to heat the glue directly in the container.
4. The gelatin should be kept under a certain temperature condition before it can be used. Therefore, when water is needed in use, the temperature of water and colloid should be basically the same, and cold water should not be added. When using gelatin, the speed should be fast and uniform. Adjust the amount of water and gelatin to get the desired viscosity.

Product detail pictures:

Related Product Guide:

We can easily normally satisfy our respected buyers with our excellent high-quality, excellent selling price and good service due to we've been far more expert and more hard-working and do it in cost-effective way for professional factory for Bone Ash Ceramics - High quality animal hide glue technical gelatin for adhesives – Gelken , The product will supply to all over the world, such as: Detroit, Rwanda, Roman, Our company always concentrate on the development of the international market. We now have a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.

Bone Ash Ceramics